Selecting Labor Prompts

This feature allows you to set up labor prompts for estimating. Options for each feature include:

• Add for Edging - Always Prompt, Add with Clear Coat, or Add without Clear Coat
• Add for Underside - Always Prompt, Add with Clear Coat, or Add without Clear Coat
• Add for Inside - Always Prompt, Add with Clear Coat, or Add without Clear Coat
• Bumper Refinish Prompt - Do Not Prompt, Prompt Defaults to Yes", or Prompt Defaults to "No"
• Aim Headlights - Always Prompt or Always Add without Prompt
• Evacuate & Recharge - Always Prompt or Add without Prompt

To select Labor Prompts options

1. Select Configure > Profiles from the menu bar.
2. Select the profile, and then select Edit from the mini-toolbar.
3. Click the Labor Prompts link.
4. Make your selection from the corresponding droplist for each labor prompt.
5. Select Save and Close from the toolbar.

© 2025 CCC Intelligent Solutions Inc. All Rights Reserved. CCC, CCC ONE, and the CCC Logo are registered trademarks of CCC Intelligent Solutions Inc. 2/17/2025 - 8:09 AM